OpenBSD 3.5 (GENERIC) #0: Tue Jul 13 19:33:27 CDT 2004 root@ibmx24.homedomain:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) III Mobile CPU 1133MHz ("GenuineIntel" 686-class) 731 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 401649664 (392236K) avail mem = 365850624 (357276K) using 4278 buffers containing 20185088 bytes (19712K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(be) BIOS, date 05/22/02, BIOS32 rev. 0 @ 0xfd7e0 apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 97% apm0: AC off, battery charge high, estimated 3:01 hours pcibios0 at bios0: rev. 2.1 @ 0xfd770/0x890 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdeb0/256 (14 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #4 is the last bus bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1000 0xcd000/0x1000 0xdc000/0x4000! 0xe0000/0x10000 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x04 ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x04 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42 pci2 at ppb1 bus 2 cbb0 at pci2 dev 3 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 11 cbb1 at pci2 dev 3 function 1 "Ricoh 5C476 CardBus" rev 0x80: irq 11 "AT&T/Lucent LTMODEM" rev 0x01 at pci2 dev 5 function 0 not configured fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42: irq 11, address 00:d0:59:ca:5a:c1 inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0xb0 pcmcia1 at cardslot1 pcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: SpeedStep pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) "Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97 Audio" rev 0x02: irq 11, ICH3 AC97 ac97: codec id 0x43525936 (Cirrus Logic CS4299 rev 6) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D audio0 at auich0 auich0: measured ac97 link rate at 4156 Hz, will use 48000 Hz isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 biomask 4800 netmask 4800 ttymask 5802 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302